Dual Fuel Range Cooker With 13amp Plug

Are you a home cook who appreciates the convenience of gas cooktops but requires an oven to bake in? Discover a dual-fuel range cooker that offers the best of both worlds.

Gas cooktops are favored by many home chefs who have years of experience in the kitchen because of their superior temperature control. They also allow them to use advanced cooking techniques, such as charring. These powerful stoves are expensive particularly if they require an extra gas connection and an electrician to install them.

What is a 13amp plug?

If you own dual fuel range cooker (also known as an electric and gas oven) is required, you’ll need an appropriately rated 13 amp plug. The plug should be wired by a licensed electrician into the cooker ring.

This ensures that the flow of current through the plug does not exceed the safe limit which could cause an electrical fire. The current is controlled by a fuse in the plug. The fuse will blow when it is deemed to be overloaded. This protects the appliance from an overload of electricity.

The fuse is rated 13 amps, as shown on top of the plug. This is the maximum amount of current that the plug could carry without damaging the appliance or heating the socket. When replacing fuses, it is essential to use the same amp rating as the original. You risk overheating a socket if you replace a fuse using a different rating.

A 13 amp fuse is likely to be a ceramic one that is extremely durable and is able to withstand extreme temperatures generated by the range cooker. Ceramic is also fire-resistant, which makes it a better choice than other kinds of fuse.

There are many ways to install an 13 amp plug. It can be connected to an existing live socket and the flex then connected to this by an screw or a plastic jaw-type cord clamp. The clamp on the cord should be tightened after the plug is firmly pushed into place.

Some plugs will include a wiring diagram on cardboard over the pins and these must be removed prior to connecting the wires. It is essential that the wires be cut to the correct length as leaving them too long can cause them to break when the plug cover is replaced. The earth wire should be the longest to connect it before the neutral and line pins.

How do I install a 13amp plug?

The vast majority of dual fuel range cookers in the UK are wired to a 13 amp plug socket and this is very important as ovens can draw a significant amount of current, and standard plug sockets are only rated at 10 amps.

In general, new appliances should include a plug at the point of sale. This is to comply with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances might not have a plug and this is the reason for the problem.

When connecting a cooker to an existing plug socket, the first thing that needs doing is to make sure that the rating of the fuse in the box matches the plug’s rating. This is vital because a faulty fuse could be dangerous.

It is also important to ensure that the fuse is fully set in the cartridge and there is no excessive movement within it. The next step is to prepare the flex to be used. Remove the sheathing from the flex in order to expose the three conductors insulated within. Then, cut the sheathing near the entry point to the plug (beyond the cord grip) using a knife without penetrating the individual conductors. The nick should be wide enough to allow for the sheathing and cable to separate as the sheathing is pulled back. Cut off the excess sheathing leaving a little more than 40mm over the flex.

This flex should be placed over the plug with the earth terminal on top and the live and neutral terminals at the bottom. The sheathing of each pin is removed using the colored conductors as a reference. The internal cable is then secured to the terminal by with the help of the cord grip. If the plug is equipped with a cord clamp that is screw-type, loosen it and then pull the insulation back to expose the copper wires. Connect each insulated conductor to the appropriate terminal (starting with the earth before neutral, and then the live) using the channel they are running through in the plug.

What is the maximum current draw of a plug with 13amps?

The maximum current draw of a 13amp plug is 3kw at 230volts. This is quite a bit of power, but the standard fuse that is fitted in a UK plugtop will not fail until the cable has reached to a dangerous level. A defective plug or socket can result in a fire, so it’s vital to keep an eye on how much power you use, especially in the kitchen.

The ceramic fuses used in plugtops weigh around 25mm in diameter and are designed for 240V mains. They will feature a BS kitemark or similar marking on the side and contain sand. Plastic or glass alternatives are available, but should never be used in combination with a live plug.

In the UK, most dual fuel range cookers are wired. They are not able to be plugged directly into an outlet on the wall. They are usually connected to a specific cooker ring circuit, which is only suitable for appliances that use up to 20 amps.

Check the ring circuit at your home with the fuse box, or call a local electrician. They will be able tell you if the sockets in your home are on the same ring or separate and whether there is a separate circuit for your oven.

The size of your kitchen is a major factor when you decide to purchase a dual fuel range cooker. We offer a broad selection of cookers that can be adapted to any space. Pick from compact 50-60cm dual-fuel models, or the huge 90cm+ double oven options by leading brands such as Rangemaster and StovesAreUs.

If you’re after something a little more unusual do not worry – we also have a wide selection of electric and gas multi-function cookers. These multi-functional appliances let you cook a variety of meals, like pasta, casseroles, and curries.

Currys offers a variety of Cookers. Explore our online selection or stop by our store to see the range. We provide free home installation and delivery on certain range cookers and flexible payment options. Our staff is ready to answer any questions you may have. Contact us via email or by phone. Credit is subject to status and terms and conditions apply.

What is stainless steel range cooker dual fuel of the switch on a cooker?

There is lots of confusion regarding what the maximum current draw of a cooker switch is. The majority of cookers are hard-wired and connected to a specific oven-ring circuit not a standard socket. It is because they often consume more than 20 amps when both the electric hob and gas oven are in use.

There aren’t any dual fuel range cookers that can be installed in a standard socket since this could pose a significant fire risk and violate electrical regulations. A licensed electrician will install any new electrical components to an appliance in the kitchen, and they will ensure that the load (both the oven and hob) do not exceed the supply capability of the circuit.

The benefits of a dual fuel range cooker are the receptive cooking power of a gas stove with the precision of an electric oven. This is the reason they are highly sought-after by chefs and cooks at home alike. If you’re looking to test various cooking techniques like searing and charcoaling, a dual fuel range cooker is the ideal option.

When buying a new range cooker you’ll need to take into consideration a number of factors like size, function and cost. Additionally, you’ll also need to make sure that your home is equipped with the right gas hook-up for the appliance. If you’re unsure, it’s best to get a Gas Safe engineer inspect your home prior to installing.

The Currys range of dual fuel range cookers offers options to fit a variety of budgets, from basic models from Indesit and Zanussi to our own exclusive Essentials collection. If you are looking for something more advanced we have a selection of top JennAir models, which feature many new features.

When you purchase a new dual fuel range cooker, it is important to check the owner’s manual for specific details on the electrical and gas requirements. You will need a gas connection in your home. A plumber might be required to install it for you. It is also possible to require a cooker-ring circuit that is installed by a qualified electrical engineer.