If you’re a home owner unfamiliar with plumbing, you’re probably familiar with the experience of being charged an arm and a leg for what seems like a simple plumbing repair. If you’d like to avoid this experience again, read on for some advice and tips on how to fix your own plumbing.

To avoid clogs, pay attention to what you flush. Sanitary napkins, thick toilet paper and baby wipes should never be flushed. These items can expand and cause a clog, or get caught on a pipe. Instead, dispose of them in a sanitary way that does not involve flushing them down the toilet.

Roots from a tree in your back yard can be a real headache when it comes to plumbing. Make sure if you have a big tree or bush or some kind of plant with a big root system, that you ask your plumbing company about root killing agents. You can flush these down your toilet and kill any roots that may be blocking your pipes and save yourself a lot of money by stopping a back up before it happens.

Group all of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.

Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.

To keep your garbage disposal working at its best, use plenty of cold water when you turn it on. Cold water helps the blades stay sharp and keeps the disposal running smoothly. If you use hot water, any grease in the disposal will liquefy, causing it to accumulate further down the drain, which could cause clogs.

Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.

Prevention will save you money in plumbing bills. The repairs that plumbers perform the most are for drains that are clogged. One major thing that causes clots is grease. It builds up over and time. You can help prevent grease build up by looking for a product on the market that will clean the grease out.

When you wash your hands, be sure that you have not left any soap on the faucet handles. What people do not know is that leaving soap on these fixtures can cause fixtures to corrode. Just take two seconds after you are done washing your hands to remove excess soap from the handles.

One of the things that you can do to safeguard your home from any serious plumbing issues is to install a flood alarm. This is a device that will sound when it comes in contact with water, alerting you if there are any issues in a particular area in the house.

Regular maintenance of your plumbing lines is a great idea. Your options are getting your lines snaked or jetted. Jetted is a technology that is proven more effective than snaking is. It gets deeper and cleans harder. So jetting is a good idea next time you are having maintenance performed on your lines.

Periodically, make sure that the sump pump in your house is working to full capacity. Pour a few gallons of water into the sump pit, and your pump should drain that water out with minimal issues. Checking that gas fitter palmerston north are working throughout the year can pay large dividends in the event of a crisis.

Plumbing isn’t as hard as it can seem, when you have access to good information and advice about how to go about solving your own plumbing problems. Next time you have plumbing problems in your house, try applying the tips from this article and see if you can save some money by solving it yourself!